钢制拖链|钢铝拖链|电缆拖链|塑料拖链|工程塑料|尼龙拖链

Welcome you to visit our company website!
Your present position:Home > 产品展示
CPG magnetic roller-type debris removal unit

CPG magnetic roller type debris removal unit is made up by the followings : reduction gear . drive chain , case , transmission chain and magnetic roller etc . The function of transmitting debris is realized in such that the reduction gear generates driving force and this driving force can be transmitted onto the transmission chain via the driving chain and the related parts on the case . Driven by the transmission chain , the magnetic roller is started to rotate . In this way . debris is conveyed through each of the magnetic rollers to achieve the purpose of debris transmission .
CGP magnetic roller type debris removal unit features friction free transmission and forced scraping structure which has brought debris conveying problems to a final solution in such a way that debris attracts onto the magnetic rollers and is kept moving on the surface of the rollers . Debris is moving between two rollers in a leap forward manner without any resistance .
It is suitable for the transmission of magnetic and / or debris . Removal debris at a pre-set intervals shall not cause any overload.

Overall Dimensions Drawing of CPG magnetic roller-type debris removal unit

Technical parameters

Water Tank Technical Parameters

Name

Length of Water tank

Width of Water tank

Height of Water tank

Flowrate of cooling pump

Dimensions

 

 

 

 

 

 

 

 

Note
( 1 ) Motor power can be determined by the effective width of debris removal B2
Levelness L1 , and lifting height H.
( 2 ) If the pitch of the chain plate is different , the height of different cases H1 . Shall be different as well.
Pitch 31.75mm Min height of the case H 1, 100mm ;
Pitch 38.1mm Min height of the case H 1, 135mm ;
Pitch 50.8mm Min height of the case H 1, 180mm ;
Pitch 63.5mm Min height of the case H 1, 230mm ;
Pitch101.6mm Min height of the case H 1, 260mm ;
( 3 ) The overall dimensions of the water tank can be made in different appearances acccording to the client requirement.
( 4 ) It can be designed and fabricated according to the client requiremen

 

Cangzhou Dongjun Machinery parts Co., Ltd. Sales Department Tel:86-0317-5280059 Fax:86-0317-5673908 E-mail: annie@dongjunmachinery.com
Website:http://www.dongjunmachinery.com Address:Dongguan Industrial Park, the old town of Cangxian